DNV Grade FH40 Marine Steel,DNV Grade FH40 Shipbuilding Steel,DNV FH40

- Sep 15, 2017 -

The higher steel grade DNV Grade FH40 shipbuilding steel plate are used abnormally owning to its high cost and substitutability.For shipbuilding steel plate DNV Grade FH40,the standard rolling size is width of 2000mm and length 6000mm,considering the steel plates can be loaded into the twenty feet container,we suggest the end users to accept 5800mm,it would cost much ocean freight for them when transport.International purchase sizes always follow the feet sizes,after calculation,the most demands sizes for DNV Grade FH40 ship plates are normally 2438mm*9144mm or 1829mm*6096mm.


GNEE steel are rolling thousands tons of shipbuilding plate DNV Grade FH40 with ABS agency endorsed and stamped every month,and transported to domestic shipyards to use and export to overseas shipyards to building vessels,docks,ships cranes.Welcome our vast customer to inquiry us for shipbuilding steel plates DNV Grade FH40 and get velued quotations&technical information form Gneesteel sooner.

 

Chemical composition of Heat analysis for Shipbuilding steel plate DNV Grade FH40 (Max %):



C

Mn

Si

P

S

Al

(acid)

Nb

0.16

0.90-1.60

0.50

0.025

0.025

≥ 0.015


0.02-0.05

Ti

V

Ni

Cu

Cr

Mo

N

0.02

0.03--0.10

0.80

0.35

0.20

0.08

0.009


 

Mechanical properties for Shipbuilding steel plate DNV Grade FH40:



Yield strength (Mpa)

Tensile strength (Mpa)

Steel Mark

390

510-650

NV/FH40/F40

conten steel plate The higher steel grade DNV Grade FH40 shipbuilding steel plate are used abnormally owning to its high cost and substitutability.For shipbuilding steel plate DNV Grade FH40,the standard rolling size is width of 2000mm and length 6000mm,considering the steel plates can be loaded into the twenty feet container,we suggest the end users to accept 5800mm,it would cost much ocean freight for them when transport.International purchase sizes always follow the feet sizes,after calculation,the most demands sizes for DNV Grade FH40 ship plates are normally 2438mm*9144mm or 1829mm*6096mm.  GNEE steel are rolling thousands tons of shipbuilding plate DNV Grade FH40 with ABS agency endorsed and stamped every month,and transported to domestic shipyards to use and export to overseas shipyards to building vessels,docks,ships cranes.Welcome our vast customer to inquiry us for shipbuilding steel plates DNV Grade FH40 and get velued quotations&technical information form Gneesteel sooner.   Chemical composition of Heat analysis for Shipbuilding steel plate DNV Grade FH40 (Max %):   C Mn Si P S Al (acid) Nb 0.16 0.90-1.60 0.50 0.025 0.025 ≥ 0.015  0.02-0.05 Ti V Ni Cu Cr Mo N 0.02 0.03--0.10 0.80 0.35 0.20 0.08 0.009    Mechanical properties for Shipbuilding steel plate DNV Grade FH40:   Yield strength (Mpa) Tensile strength (Mpa) Steel Mark 390 510-650 NV/FH40/F40

Related News

Related Products

  • Cold Rolled Stainless Steel plate (430 201 304 410)
  • CCS ABS Lr Gl Nk BV Certified 245mm 260mm 270mm 280mm Bridge Fittings
  • Ship Bridge Fitting RINA Steel Plate
  • Astm A871 Grade 60 Steel Sheet Plate
  • Half Copper 201 Stainless Steel Coil with 2b Finish Cold Rolled
  • 410 Cold Rolled Stainless Steel Coil (Sm033)