Dn 1.4547 Cold Rolled Stainless Steel Plate for Metal Molding
Model NO.: 1.4833 1.4948 1.4547 Width: 1000mm to 2200mm Length: Cut as Requirement Surface: 2b, No.1, 1d, 2D, Hl, 8K, Ba, Sb Edge: Mill Edge or Slit Edge Mtc: En 10204/3.1 MOQ: 1 Ton Trademark: TISCO, LISCO, ZPSS, KRUPP Transport Package: as Customer′s Requirement Specification: Thickness 0.3mm...
If you're satisfied with our dn 1.4547 cold rolled stainless steel plate for metal molding, welcome to place orders with us. As one of the best Cold Rolled Steel Plate manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered.
Alloy 309/309S (UNS S30900/S30908) austenitic stainless steel is typically used for elevated temperature applications. Its high chromium and nickel content provides comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than the common austenitic Alloy 304.
Alloy 309 (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The alloy resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).
Because of its high chromium and low nickel content, Alloy 309 can be utilized in sulfur containing atmospheres up to 1832°F (1000°C). The alloy is not recommended for use in highly carburizing atmospheres since it exhibits only moderate resistance to carbon absorption. Alloy 309 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced.
When heated between 1202 - 1742°F (650 - 950°C) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 - 2102°F (1100 - 1150°C) will restore a degree of toughness.
309S (UNS S30908) is the low carbon version of the alloy. It is utilized for ease of fabrication. 309H (UNS S30909) is a high carbon modification developed for enhanced creep resistance. It most instances the grain size and carbon content of the plate can meet both the 309S and 309H requirements.
Alloy 309 can be easily welded and processed by standard shop fabrication practices.
2:Chemical Composition with different standards:
|Commodity||Stainless Steel Plate/Stainless Steel Sheet|
|Thickness||0.3mm--16mm(cold rolled) 3mm--280mm(hot rolled)|
|Length||1000mm-6000mm, as customers' request|
|manufacture||Hot Rolled/Cold Rolled|
|Packing||Packed in bundles with standard export sea-worthy package|
|Delivery Time||Within 15 working days, according to customers' quantities|
|Quality||High Quality.SGS inspection is accepted if needed|
|Place of Origin||Tianjin|
|Application||ncinerators, rotary kilns and calciners,grids, piping, wind boxes|
|Note||We can also do other materials|
- Previous: S235J0W Corten Steel Plate
- Next: Xar500 Wear Resistant Steel Plate/Armor Steel Plate Ballistic Plates